Got Free Inquiry Now

We will contact you as soon as possible!

HPL Cleanroom Wall Panels System

Home /

Cleanroom Wall Panel System


Scratch & VHP Resistant Cleanroom Panel


HPL Cleanroom Wall Panels System

/Impact Resistance HPL Partition Wall Panel For Pharmaceutical Cleanoom

Impact Resistance HPL Partition Wall Panel For Pharmaceutical Cleanoom

  • Lead Time:

  • Product Orgin:

  • Shipping Port:

  • Payment:

  • Color:

  • Width:

  • Max Length:

  • Wall TCK:

  • Steel Facer TCK:

  • Core Materials:

    PU/Rock wool/Magnesium board/Paper honey comb/Aluminium honey comb/Plaster/EPS
  • Frame TCK:

  • Applications:

    Pharmaceutical industry grade B
This product is widely used in the pharmaceutical, electronic, aerospace, military and other industries, using High-pressure Laminate wall systems. The system is connected by aluminum profiles, which has a simple structure and convenient disassembly. The panel is a sandwich structure, which can be filled with rock wool, paper honeycomband other materials.

share it :

facebook twitter linkedin youtube pinterest
  • Product Details

The pharmaceutical industry often uses dry or wet gasification hydrogen peroxide disinfection and sterilization systems. Due to the strong permeability of hydrogen peroxide, the intrusion reaches sub-micron level, which will be from the surface of the purification plate and the surface of the purificationdoor. The crack penetrates into the interior, causing the surface of the clean room wall and the cleanroom door to bulge, falling off, and tearing of the paint.HPL cleanroom wall panel resistant to VHP disinfection.

High Pressure Laminate (HPL) Sandwich Panel for Cleanroom


  1. Wiskind HPL clean room wall system is strong at any point on the board due to its uniform structure and compactness.The color tone, pattern and texture of the surface of the melamine board are quite abundant, so it can be used out doors with corresponding strength requirements and appearance requirements.
  2. The beauty of the product lasts for a long time, and HPL's impact absorption and special manufacturing process make it have a certain degree of seismic resistance. 
  3. HPL has excellent impact resistance, water resistance, moisture resistance, chemical resistance, heat resistance, abrasion resistance, chemical resistance, and weather resistance.Sunlight does not cause discoloration or fading. In addition, the product is difficult to get dirty, easy to clean, and easy to maintain.

Introduction to HPL

HPL clean room panel, that is, thickened double veneer high pressure refractory decorative plate, can be used as structural material without adhering to the base material.With excellent mechanical properties, it is suitable for load-bearing table.Widely used in indoor wall, bathroom partition, dressing room partition, space partition, storage cabinets and all kinds of mesa, to provide single or double unified decorative effect.General size: 4 'x8' (1220mmx2440mm) 5’x10’ (1525mmx3050mm)

  1. rich color, strong decoration, pure color, wood, stone, color and other decorative effects are optional • can be combined with a variety of surface texture to present excellent visual and real touch.
  2. compact and stable structure, high strength and good toughness.
  3. wear resistant surface, durable.
  4. high crash resistance.
  5. strong compression resistance, high hardness, good load-bearing performance.
  6. customizable personalized patterns.

HPL Maintenance instructions

1) general pollution can be cleaned with ordinary wet cloth.

2) for minor stains, use warm water and neutral soap to clean the surface.

3) stubborn stains should be cleaned with high-concentration detergent, or wiped with alcohol, acetone and other solvents.

5) use soft dry cloth to wipe after cleaning.

6) do not use steel brush or polishing agent with abrasive to clean, as it may scratch the surface of the plate.

7) do not use sharp hard objects to mark the surface of plates.

8) do not put overhot objects directly on the board surface.

9) do not use abrasives or non-neutral cleaners.

Got Free Inquiry Now
We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products

China Modular Cleanroom Wall Panels

Cleanroom Sandwich Wall Panel For Pharmaceutical Clean Room With CE

The modular sandwich cleanroom wall panel system is made of aluminum profiles,various surface steel,factory prefabrication,on-site splicing,module installation is convenient and fast,mainly used in operating clean room.

ULPA Filters Ceiling Module

Replaceable HEPA and ULPA Filters Ceiling Module For Pharmaceutical Clean Room(Gel-Sealed Type)

High efficiency particulate air (HEPA) filters and ultra-low particulate air (ULPA) filters are air filters designed to trap a vast majority of very small particulate contaminants from an air stream.

Aluminum Profile Cleanroom Corner Systems

One Piece Aluminum Profile Cleanroom Corner Systems For Pharmaceutical

The one piece corner system completely eliminates the various corner joints between the wall panels, which ensures the smoothness of the wall panels and avoids the impact of joint cracking and leakage on the clean environment. Avoid dust accumulation, which is more conducive to cleaning and process sterilization.

Walkable I-Grid Steel Cleanroom Ceiling Systems

I-Grid Steel Ceiling With Sandwich Panel Systems For Clean Room

The system includes an aluminum ceiling keel system and a clean ceiling system that adds light to the ceiling, fire-fighting equipment, etc. The ceiling is perfectly connected to fire-fighting equipment, fixtures and access holes. It is widely used in the pharmaceutical, electronics, aerospace and other industries where clean ceilings are required.

GEZE Cleanroom Door Locks

GEZE Clean Room Steel Door Locks Handle Sets For Biological Cleanroom

Locks are essential for the classification of areas in a clean room. A lock is an enclosed area between two or more rooms with different levels of cleanliness. Rooms in different cleanroom cleanliness are closed and locked to each other. Wiskind offers different types of locks and control systems to meet your individual needs.

Stainless Steel Pass Box

Manufacturer of Clean Room High-quality Stainless Steel Pass Box With UV Light And Automatic Door System

Pass box is used to transfer the material from lower cleanliness area to higher cleanliness area or vice-versa in the classified area and also known as the hatch.

China Stainless Steel Cleanroom Doors Manufacturer

Customization Easy Clean Sturdy SS Steel Cleanroom Doors

Wiskind SS cleanroom door is made of high quality 304 stainless steel plate, beautiful and wearable, durable, chemically stable, and can be used for a long time under various salt spray acid environment. The factory can be customized.

Newsletter Sign Up

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can !

Got Free Inquiry Now We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!