Impact Resistance HPL Partition Wall Panel For Pharmaceutical Cleanoom

Wiskind HPL wall panels are used across a wide range of industries, including pharmaceuticals, electronics, aerospace, and defense.

The HPL system features a modular design connected by aluminum profiles, allowing for easy construction and disassembly. Each panel uses a sandwich structure that can be filled with rock wool, paper honeycomb, aluminum honeycomb, or other materials, depending on your specific needs. These panels are also designed to complement our cleanroom door and windows to make the cleanroom more beautiful.

Advantages 

1. Our HPL wall panels are stable and durable, thanks to their uniform structure and compact design. The color tone, pattern and texture of the surface of the melamine board are quite abundant, so it can be used out doors with corresponding strength requirements and appearance requirements.

2. Unlike other cleanroom panels that crack or bulge after exposure to Vaporized Hydrogen Peroxide (VHP) disinfection, Wiskind's HPL panels are VHP-resistant. They also offer excellent resistance to chemicals, heat, moisture, and abrasion

3. Our HPL wall panels resist dirt, clean easily, and require minimal maintenance.

4. HPLs maintain a sleek and polished look, even after years of use. They're also highly customizable, with a wide variety of colors, patterns, and textures to choose from.

HPL Maintenance Guidelines

1. Clean general dirt and dust with an ordinary wet cloth.

2. For minor stains, clean the surface with warm water and neutral soap.

3. For stubborn stains, use a high-concentration cleaner, or wipe with solvents such as alcohol or acetone.

4. After cleaning, wipe the surface with a soft, dry cloth.

5. Do not use steel brushes or polishing agents to clean, as they may scratch the surface.

6. Do not use sharp hard objects to mark the surface of plates.

7. Do not place excessively hot objects directly on the panel's surface.

8. Do not use abrasives or non-neutral cleaners.

Introduction to HPL

HPL cleanroom panel, that is, thickened double veneer high pressure refractory decorative plate, can be used as structural material without adhering to the base material.With excellent mechanical properties, it is suitable for load-bearing table.Widely used in indoor wall, bathroom partition, dressing room partition, space partition, storage cabinets and all kinds of mesa, to provide single or double unified decorative effect. General size: 4 'x8' (1220mmx2440mm) 5’x10’ (1525mmx3050mm) 

1. Rich color, strong decoration, pure color, wood, stone, color and other decorative effects are optional • can be combined with a variety of surface texture to present excellent visual and real touch.

2. Compact and stable structure, high strength and good toughness.

3. Wear resistant surface, durable.

4. High crash resistance.

5. Strong compression resistance, high hardness, good load-bearing performance.

6. Customizable personalized patterns.