Hinged door suitable cold rooms having negative temperatures up to -45°C

Standard type

• Blade edge in anodized aluminium (thikness 151 mm) with PVC profile for second gasket;

• Blade covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10;

• CSI handle or Equa certified EN179:2008, without key;

• N. 2 Double density EPDM gasket on 3 sides;

• PVC lower gasket;

• Heating cable ~30W/m powered at 220V and put inside the gasket on the blade.

Frame system

• Frame and side-frame “L” 110/60 in PVC colour RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it’s assembled (90°) with joints;

• Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);

• Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable;

• Heating cable ~30W/m powered at 220V and put inside the frame.

Blade/frame system

MTH hinges not adjustable

Standard dimensions for one blade version

• Up to 1200x2500mm: blade having just the CSI or Equa handle;

• From 1200x2500mm up to 1500x2500mm: blade having CSI or Equa handle + closing latch (additional closing system with spring).

Standard dimensions for two blades version

• Up to 3000x2500mm;

• It’s made of a mobile part (the right one, if not otherwise specified) and a semi-fixed blade (with 2 internal hatches, 1 upon and 1 below) that can have a total width double compared to the one blade version.

• The two blades can have different widths, even if generally the fixed one is requested more narrow.

Stainless Steel Type

Blade

• Blade edge in stainless steel 304 thickness 15/10 (total thickness 151mm, included the bearing in PVC of the gasket ) folded and welded;

• Blade coated with stainless steel 304 sheet thickness 6/10;

• CSI handle or Equa certified EN179:2008, without key;

• N. 2 EPDM double density gasket on 3 sides;

• PVC lower gasket;

Frame system

• Frame and side-frame “L” 110/60 in PVC colour RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it’s assembled (90°) with joints;

• Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);

• Threshold S/4, the frame (2 jambs + 1 transom) it’s partially put (80 mm) into the floor. At the bottom of the frame are fixed a tubular made of iron (60 x 60 mm) and another one made of stainless steel (60 x 20 mm), which are recessed into the floor. Only the upper part will result visible at the end of the work. Inside the stainless steel tubular there is the heating cable;

• Heating cable ~30W/m powered at 220V and put inside the frame.

Blade/frame system

MTH hinges not adjustable

Standard dimensions for one blade version

• Up to 1200x2500mm: blade having just the CSI or Equa handle;

• From 1200x2500mm up to 1500x2500mm: blade having CSI or Equa handle + closing latch (additional closing system with spring).

Standard dimensions for two blades version

• Up to 3000x2500mm;

• It’s made of a mobile part (the right one, if not otherwise specified) and a semi-fixed blade (with 2 internal hatches, 1 upon and 1 below) that can have a total width double compared to the one blade version.

• The two blades can have different widths, even if generally the fixed one is requested more narrow.